Jetting Nozzles

 

 

  1. UTS Tools & Equipment Catalogue

 

Below is a list of some of our most popular nozzles, but this is not a complete listing of the nozzles and accessories we have available. Please contact us with your particular requirements, we would be more than happy to draw on our past experience in drain cleaning and our knowledge of the various nozzles and accessories available to help find the right solution for your sewer cleaning needs.

Wiesel

The Wiesel K28 nozzles manufactured in hardened alloy steel are designed for general pipe cleaning requirements. Applications: Small pipes with limestone, soap and grease build-up. General pipe cleaning.

 

Tristar

The TriStar Nozzles, manufactured in hardened alloy steel, with four front jets, are designed for high penetration power when it is crucial to break through blocked material. Applications: Removal of heavy blockages, roots and deposits

 

Dracula

This series of nozzles are manufactured in hardened alloy steel or stainless steel. Applications: Cleaning of pipes where high thrust is required. Pipes with sharp turns and/or heavy build up

 

HW 70 - HW110

These high efficiency nozzles are manufactured for highly soiled pipes with a high feed performance, set new standards in sewer cleaning. The high efficiency makes it possible to transform water energy into cleaning, and forward drive output. Because of the enclosed nozzle inserts and the use of hardened alloy steel the service life is very long. Applications: General pipe cleaning, sand and Sludge removal.

 

BK and Swingmax

These large high efficiency nozzles combine a maximum of cleaning and forward drive power. The high resistance to wear and tear, and the resulting long service life is due to the use of hardened alloy steel. Applications: Cleaning of pipes where high thrust is required. Pipes with sharp turns and/or heavy build up of debris.

 

Rondo

The "Rondo" series nozzles perform the same cleaning results of the rotating nozzles without losing impact force due to the spinning effect. The fan-jets always give 360° of coverage uniformly throughout the inside of the pipe. This is an excellent nozzle for the removal of grease and also for use prior to a CCTV survey as the fan-jet will not leave any streaks on the wall of the pipe. Applications: removal of soap, grease, bitumen. Thorough cleaning prior to CCTV inspection.

 

Mega 6 & Mega 8

The "Mega" series nozzles are designed with heavy weight in order to provide for maximum penetrating effect on mud, sand and various sediments. Applications: Various Profiles. Breaking- up and removal of material.

 

Powerjet

The latest generation of our ejector nozzles are specially suitable for cleaning of water bearing pipes in sewers from 16" through 144" up to mega profiles. These nozzles are ideal for removal of high levels of debris in water bearing pipes as they use the water flowing in the sewer/drain to aid the cleaning process. Because of the low pressure/high volume cleaning effect of the PowerJet they can even be used in older sewer networks due to the "soft" cleaning effect.

 

RDS & Avanti

The RDS series nozzles are very effective tools for cleaning of pipes. The rotating element and jets scour the surface of the pipes loosening hard debris. Applications: Removal of grease, mineral deposits, limestone.

The Avanti was specially invented to free sewer pipes from ice, but it can also be used to remove similar deposits, such as small roots, mineral deposits etc. Applications: Ice, light roots, mineral deposits

 

Vibration Nozzles

Roto Jiggler - a new concept for the easy removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems (not to be used in Clay or Stoneware Pipes)

RDS-V - a new concept for the easy removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. Applications: Pipes with heavy Blockage (not to be used in Clay or Stoneware Pipes)

RuMax - a new concept for the easy removal of mineral deposits, concrete, slag, building material or comparable substances in pipe and sewer systems. High power turbine driven vibration nozzle(not to be used in Clay or Stoneware Pipes)

Rotomax

This slow rotation nozzle ensures that the maximum amount of the water power is directed to the blockage/pipe wall and puts the user as well as the receiver of service in a position to solve even the most complicated problems. Applications: Removal of grease, mineral deposits, limestone

 

Standard Chain Rotor

Applications: Removal of deposits and roots

 

Combi-Chain-Rotor

IBG produces this chain rotating nozzle in different variations with accessories such as the centre knife shown in the picture. The combi chain rotor can be used with either bicycle chain or link chains depending on the application. Applications: Removal of deposits and roots

 

Vari Turn

The VariTurn was especially designed to guide the Chain rotors, RotoJet, RotoMax and Rondo centrally through the pipes. Applications: Centering the nozzle in the sewer pipe

EEL Cutter - Curve passable chain rotor

The precise and variously usable tool made out of Case hardened steel is suitable for the removal of deposits and roots. Applications: Removal of Deposits and Roots

Nozzle Kits

We offer a wide range of nozzle kits to suit your needs. The standard "sewer cleaning kit" include a range of nozzles that will cover the majority of your cleaning requirements, e.g Rotomax, HW, Rondo,Wiesel,Tristar and Combi-Chainrotor. The "sewer cleaning kit Plus" also includes a centering device such as the variturn or varicage.

WAMAX

This Worldwide leading Milling System is used for the removal of roots, mineral deposits, concrete, protruding sockets as well as for the preparation of rehabilitation works. The simple construction of the cutting heads as well as their operating life make different applications possible with the use of various guiding cages and milling heads. The WaMax System works from diameter 3" up to 40".